튜브피팅 어댑터/ADAPTER 시리즈 _ SUPERLOK _ 오토시스템
튜브피팅 어댑터/ADAPTER 시리즈 _ SUPERLOK _ 오토시스템
▶SMA Male Adapter◀
▶SFA Female Adapter◀
1.Required installation is to conet tubing in direction shown, to a female port | 3.To connect this situation, me rely tighten pipe thread of male adapter into female port |
2.With pipe connection tight, the male elbow is pointing in the direction for desired tubing run. | 4.connect union elbos to adapter by tightening SUPERLOK connetion with wrench while holding elbow pointiing in desited direction Then insert tubing into the other end of the Union Elbow and connect tubing |
▶SPC Port Connector◀
▶SRPC Reducing Port Connector◀
Remove nut and femrrules from the first of two SUPERLOK ports to be connected
Slip nut(no ferrules) over machined ferrule end of port connector.
Insert port connector into SUPERLOK port1 and snug by hand.
Tighten with wrench 1/4tum only. For 1/8, 3/16, 2, 3, and 4mm tube fittings, tighten only 1/8 tum.
subsequent connections are made by tightening slightly with a wrench after snuggung the nut by hand.
Insert other end of connectoer into SUPERLOK port2 and tghten nut 1 1/4 turns from finger-tight.
For 1/16, 1/8, 3/16., 2, 3, and 4mm tube fittings, only 3/4 tum from finger-tight i snecessary.
튜브피팅 어댑터/ADAPTER 시리즈 _ SUPERLOK _ 오토시스템