불소분석기 _ NS-9310-F on-line Fluoride Analyser _ 넥서스테크놀로지

불소분석기 _ NS-9310-F on-line Fluoride Analyser  _ 넥서스테크놀로지

▶불소분석기 _ NS-9310-F on-line Fluoride Analyser◀

. 제품 크기 : 1700X600X420 mm(LXWXD)

. 전원 : 110/220V@50Hz-60Hz   /150W      

. 동작온도 : 0℃ to 50℃

Specification

●  Range : 0.00ppm ~ 3500ppm  

     Built-in with non-maintain dilution system    For fluoride >5,000 ppm,

     PH must > 4   Option pre-treatment cabinet for hydro fluoric acid determine. 

●  Accuracy : < ± 5% of full scale

●  Response time : < 2 mins

●  Calibration : Manual/Auto 

● Analysis Frequency : 10 ~ 15 min 

● Auto Clean : Water and acid with stirring.

● Output : (1). 1 sets of 4~20 mA             

                (2). 1 set dry contact or 24VDC alarm   

● PH sensor (built-in) for sample only and mix of TISAB solution PH detection. 

● Single stream capability only  (opti0n : multi channel)

● Sample: pressure > 0.5 Bar 

● Flow : 10 ~ 300 L/hour  

● DI water : > 0.5 Bar ● Air source : > 5Kg/cm2  

● Power: 110/220VAC±10%, 60Hz /150W 

Characterize

● Wide bore design for sample vessel and sample inlet tube, prevent of tube blocked.

● Inlet and drain are nearly not possible to be blocked by suspense solids because of air actuate valves.

● Graphic interface, easy of operate.

● Touch panel with pop-up all function keypad.

● Build in data logger for data display and history data browse.

● Alarm message display and record.

● Analyzer auto diagnose function, least maintain man power

Principle

● Direct with FLUORIDE ION  SELECTIVE ELECTRODE. 

● PH Adjusting : Buffer auto dose to adjust sample PH to  5.2~5.4 for detecting. 

● Interference Eliminated :  With EDTA or CDTA to   eliminate interference of Al+3 and Fe+3 

NS 9310 F 카다로그 - 불소분석기.pdf

---

---

불소분석기 _ NS-9310-F on-line Fluoride Analyser  _ 넥서스테크놀로지